Menzerna Super Heavy Cut New Formula High Performance Compound 250ml
Write a review
/
Tax included.
26.95
Menzerna Super Heavy Cut Compound is the all new heaviest cutting and correction compound from Menzerna, packed with 25% more correctional ability than FG400!
Because it contains even more extremely refined aluminium oxide Menzerna Super Heavy Cut is able to remove scuffs, scratches and swirl marks from even the toughest paints. As with all Menzerna polish it is manufactured using the most uniform shaped abrasive particles, which not only results in a high level of cut, but also a level of shine that shouldn't be achievable from a product with this level of cut. It is so effective at not inducing hazing that it possible on harder paints to go directly from compounding to a finishing product.
Menzerna Super Heavy Cut also produces very little in the way of dust and offers longer working times making this polish pleasant to work with.
We therefore highly recommend this polish on all harder paints and where there are heavier scuff, scratches or swirl marks.
-Maximum in abrasion
-Fast Cutting Action
-Low Dusting
-Removes 1500 grit sanding marks
-Silicone & Filler Free
-Cut: 10.0 (Max: 10.0)
-Gloss: 5 (Max:10.0)
Directions for use:
-Ensure surface is clean, dry & cool to the touch
-Apply 2-3 pea sized amounts to a medium/heavy polishing pad or lambswool pad depending on the requirements of the job
-Place pad against paintwork & work at low speeds to spread compound
-Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary)
-Wipe residue with Soft microfibre towel
-Finish can be checked using Menzerna Control Cleaner to remove all residue is removed
Menzerna Super Heavy Cut also produces very little in the way of dust and offers longer working times making this polish pleasant to work with.
We therefore highly recommend this polish on all harder paints and where there are heavier scuff, scratches or swirl marks.
-Maximum in abrasion
-Fast Cutting Action
-Low Dusting
-Removes 1500 grit sanding marks
-Silicone & Filler Free
-Cut: 10.0 (Max: 10.0)
-Gloss: 5 (Max:10.0)
Directions for use:
-Ensure surface is clean, dry & cool to the touch
-Apply 2-3 pea sized amounts to a medium/heavy polishing pad or lambswool pad depending on the requirements of the job
-Place pad against paintwork & work at low speeds to spread compound
-Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary)
-Wipe residue with Soft microfibre towel
-Finish can be checked using Menzerna Control Cleaner to remove all residue is removed
